GE Versana Balance User Manual

General Procedures and Functional Checks
4-72 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
4-5 Power supply test & adjustments
4-5-1 Power Supply Test Procedure
There is no need to do any special tests on the Power Supplies
if there don’t seems to be a problem that may be related to the
Power Supply.
Refer to
7-7-1-1 ‘System Doesn’t Boot (Hang-up)’ on page 7-51,
if you appear to have a problem that may be related to the
Power Supplies.
4-5-2 Power Supply Adjustment
There are no adjustments on the power supply. The DC Power
is self-regulated. If a voltage is outside the specified range, it
means that something is wrong, either with the power supply
itself or with a unit connected to that specific power outlet. When
an error occur, the power will be turned off immediately.
Refer to
7-7-1-1 ‘System Doesn’t Boot (Hang-up)’ on page 7-51,
if you appear to have a problem that may be related to the
Power Supplies.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports