GE Versana Balance User Manual

General Procedures and Functional Checks
4-54 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
4-4-6 Performance Tests
4-4-6-1 Image Quality Check (IQC) preset for service
Image Quality Check (IQC) is intended to facilitate Image
Quality checks during Quality Assurance Evaluation. Quality
Assurance tests are used to determine whether a scanner is
providing the same level of performance year after year.
By using the same setting year after year, this ensures that the
data collection consistent, independently of who performs the
test.
This preset only includes fundamental settings for 2D mode.
Processing modes like SRI, Harmonics, etc., are turned off.
To do IQC, follow the steps below:
NOTE: The IQCforService is only visible when service dongle is
connected to the system.
1. Activate IQC via Utility--> Admin--> System Admin.
Check the “Enable IQC for Service” box. Select Save, then
select Exit.
Figure 4-58. Check “Enable IQC for Service”

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports