GE Versana Balance User Manual

System Setup
3-90 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-9-7 Dataflow
A dataflow is a set of pre-configured services. When you select
a dataflow, the ultrasound system automatically works according
to the services associated with the dataflow. The Dataflow tab
allows you to select and review information about dataflows. You
can also create, change, and remove dataflows.
Set up dataflows for the services.
NOTE: You must be logged on as Administrator to use the Dataflow tab.
CAUTION
DO NOT rename the factory default dataflow.
Table 3-32: Setup an Image Storage Service
1 Select the dataflow from the list.
2 Select to store data directly to archive (no buffer storage).
3 Select so that this dataflow does not appear as a Dataflow on the Patient menu.
4 Select to use this dataflow as the default dataflow when you start the system.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports