GE Versana Balance User Manual

System Setup
3-94 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-9-9 Removable Media(continued)
Formatting removable media
1. Select the removable media from the Media list.
2. Type a name for the removable media in the Label field.
NOTE: Do not use the following characters for labelling:
\ / : ; . , * < > | + = [ ]
3. Select Format. Confirm OK or Cancel.
4. An information window confirms when the format has been
completed. Select OK to exit.
Verifying removable media
1. Select the removable media from the Media list.
2. Select Verify.
3-9-10 Miscellaneous
The Miscellaneous tab allows you to configure tools related to
patient management and print and store options. You can
specify default system functionality, such as whether patient ID
is required when you archive data, or if you want the system to
automatically search the archive for a patient when you enter
patient data.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports