GE Versana Balance User Manual

System maintenance
Versana Balance – Basic Service Manual System view 10-17
5808768-100 English Rev.9
10-6-5 Probe maintenance
10-6-5-1 Probe related checks
10-6-5-2 Basic probe care
The Ultrasound system user manuals and various probe
handling cards provide a complete description of probe care,
maintenance, cleaning and disinfection. Ensure that you are
completely familiar with the proper care of GE probes.
Ultrasound probes can be easily damaged by improper
handling. See the User Manual and probe care cards for more
details. Failure to follow these precautions can result in serious
injury and equipment damage. Failure to properly handle or
maintain a probe may also void its warranty.
Any evidence of wear indicates the probe cannot be used.
Do a visual check of the probe pins and Ultrasound system
sockets before plugging in a probe.
The Interoperative probes often have special considerations and
individual probe user manuals. For Interoperative probes also
refer to their separate user manuals.
Table 10-12: System preliminary checks
Step Item Description
1. Probe Holder Clean probe holders. (they may need to be soaked to remove excess gel).
2. Probes Thoroughly check the Ultrasound system probe connectors and remove
dust from inside the connector sockets if necessary. Visually check for
bent, damaged or missing pins.
3. Probes Verify that the Ultrasound system properly recognizes all probes.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports