GE Versana Balance User Manual

Connectivity setup
Versana Balance – Basic Service Manual System view 3-85
5808768-100 English Rev.9
3-9-2-1 Changing the AE title and/or Port Number
1. To change AE Title and/or Port No, edit the respective
fields.
Figure 3-81. AE Title/Port No
2. Select Save to store your changes. This will bring up a new
warning screen.
Figure 3-82. Warning Message
3. Select OK to save your changes or Cancel to return without
saving any changes.
4. Reboot the system to activate the settings or continue with
other TCPIP setup tasks.
3-9-3 Network setup
For network connection setup,
See 7-6-1 ‘Network
Configuration’ on page 7-34 for more information.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports