GE Versana Balance User Manual

System Setup
3-28 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-8 Peripherals Installation
3-8-1 Overview
This section describes how to install and configure the
peripherals validated for the Versana Balance.
About the operation check-out of peripherals,
See
4-4-18 ‘Peripheral checks’ on page 4-70 for more information.
Table 3-13: Versana Balance Peripherals
Description Control Model
B/W USB Printer USB port Sony UP-D898MD Printer
USB Printer USB port Sony UP-D898DC Printer
Color USB Printer USB port Sony UP-D25MD Printer
3-Pedal Footswitch USB port Footswitch MKF 2-MED USB GP26
1-Pedal Footswitch USB port Whanam FSU-1000
USB Stick USB port USB stick H48962LC
USB HDD USB port 1TB mobile USB HDD
ECG ECG Port USB ECG Module
Wireless Adaptor USB port Wireless Adaptor
Bluetooth Adaptor USB port Bluetooth Adaptor
DVD RW USB port DVDRW kit with SW

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports