GE Versana Balance User Manual

System Setup
3-98 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-9-11 Bluetooth
To add a new bluetooth device,
1. Press Add New Device.
2. Type the device name in the Name field.
Figure 3-86. Connectivity Bluetooth Preset Menu
Table 3-42: Device
Preset Parameter Description
Add New Device/Remove Press Add new device to add a new device; press Remove to delete a
device.
Properties: Name Type the name of the device.
Properties: MAC Address Unique network card address. NOTE: Only available for MyComputer.
Properties: Enabled Select to enable bluetooth device.
Properties: Image Transfer
Support
Select to enable image transfer.
Properties: Date Added Display the new device added date.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports