GE Versana Balance User Manual

System Setup
3-14 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-3-6 Unpacking the Versana Balance
When a new system arrives, check that any components are not
damaged and are not in short supply. If shipping damage or
shortage occurs, contact the address shown in Chapter 1.
NOTE: Please check the Versana Balance console is well assembly
after unpacking the system.
CAUTION
Please carefully unpack the system, and do not dispose the
package of Versana Balance, so that it can be reused for
service.
CAUTION
Do not lift the unit by the Keyboard. Equipment damage may
result.
CAUTION
The crate with the Versana Balance weighs approximately
50kg. Be prepared for a sudden shift of weight as the unit is
removed from its base (pallet).
Table 3-6: Unpacking the Versana Balance
Step Description Corresponding Graphic
1 Cut off the two packing straps around the crate.
Note: To avoid injury, hold the strap clasp with
one hand when cutting the strap.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports