GE Versana Balance User Manual

System Setup
3-6 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
3-3 Receiving and unpacking the
equipment
3-3-1 Purpose of this section
This section describes how to receive and unpack Versana
Balance.
3-3-2 Contents in this section
•
3-3-3 ‘Warnings for receiving and unpacking’ on page 3-6
• 3-3-4 ‘The Tilt indicator’ on page 3-7
• 3-3-5 ‘Receiving the Versana Balance’ on page 3-8
• 3-3-6 ‘Unpacking the Versana Balance’ on page 3-14
3-3-3 Warnings for receiving and unpacking
CAUTION
Two people are needed to unpack the Ultrasound system
because of its weight. Attempts to move the Ultrasound system
considerable distances or on an incline by one person could
result in injury or damage or both.
Two people are required whenever a part weighing 16 KG (35
LBS) or more must be lifted.
CAUTION
Remember to use relevant personal protecting equipment
(PPE) during packing and unpacking. Check with your local
EHS representative.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports