GE Versana Balance User Manual

Diagnostics/Troubleshooting
7-24 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
7-5-5-6 FRU Status
FRU Status displays a summary of the FRUs being monitored
and the details for each FRU.
To access this page, under System Status, select Temperature
and then select FRU Status.
Figure 7-18. FRU Status
This table shows all the elements available on FRU Status with
descriptions.
For more information, see:
•
7-5-5-5 ‘Temperature’ on page 7-23
• 7-5-5 ‘Home’ on page 7-16
Table 7-5: FRU Status
Element DESCRIPTION
FRU Status Summary Number of the FRUs being monitored.
FRU Status Details
Name Name of the FRU.
• ETX3 - Represents the ETX 64 transmitter board.
• ETX4 - Represents the ETX 128 transmitter board.
Status Status of the FRU. Valid values are:
• Normal - Indicates that the FRU is operating within the allowable range.
• Warning - Indicates that the FRU is operating close to the limit of the allowable range.
• Error - Indicates that the FRU is operating outside the allowable range.
Low Level Warning Number of low temperature warnings.
High Level Warning Number of high temperature warnings.
Low Level Errors Number of low temperature errors.
High Level Errors Number of high temperature errors.

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports