102 43-TV-25-30 Iss.6 GLO Aug 07 UK
Factory
(Main Menu > Configure > Setup > Edit Setup> General > Factory)
The Factory menu contains information on the Firmware Credit System, Upgrading the re-
corder Firmware, CJC and Analogue Input Card Calibration, Demo Traces, Reset Setup
function and a Localisation menu.
• Credits - The Credit menu contains the Serial no. of the recorder, how many credits are
available, displays the Options Code and lists what Firmware Options are currently
active. See “Credits” on page 102
• FW Upgrade - The Firmware Upgrade button allows new versions of the recorder
firmware to be loaded into the recorder.
See “FW Upgrade” on page 103
• Calibration - Analogue In and CJC Calibration can be performed per slot (card). See
“Calibration” on page 103
• Demo Traces - A set of demo traces are available for demonstration or simulation pur-
poses.
See “Demo Traces” on page 106
• Reset Setup - Select this to clear the current setup. A Warning message will appear
before activating the reset.
See “Resets” on page 107.
• Localisation - Set up the recorder for native language use and global settings. See
“Localisation” on page 107
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
Credits
(Main Menu > Configure > Setup > Edit Setup> General > Factory > Credits)
The Credit menu contains the Serial No. of the recorder, how may credits are available, dis-
plays the Options Code and lists what Firmware Options are currently active.
• Serial No. - read only and cannot be edited.
• Credits - read only and cannot be edited. It displays the number of Credits available to
activate additional firmware functionality.
To Next Page
Loading...
Need help?
General
