Honeywell X Series User Manual

50 43-TV-25-30 Iss.6 GLO Aug 07 UK
Setup Menu
(Main Menu > Configure > Setup)
In the Setup menu the user can configure how the recorder acquires, stores and actions da-
ta. The Setup screen gives access to the Edit menu where the majority of the recorder con-
figuration is done, also Save and Load setups from this screen.
Edit Setup
(Main Menu > Configure > Setup > Edit Setup)
The Edit Setup gives access to sub-menus for Field IO, Pens, Comms, Events/Counters,
General, Screen and Recording set up. See “Edit Setup” on page 51.
Save Setup
(Main Menu > Configure > Setup > Save)
The Save button will produce a list of destinations to save the set up to and allow for naming
the setup file. Maximum of 50 characters. File format is .set
The Compact Flash and the front USB device port are found under the front flap on the re-
corder. There is another USB port at the rear of the recorder. The first USB device fitted will
be USB1, therefore the second USB device fitted is USB2.
Compact Flash not available
for the eZtrend QXe.
Load Setup
(Main Menu > Configure > Setup > Layout)
Setups can be loaded from Compact Flash or USB key. The Load button will produce a list
of source files to load setups from.
The Compact Flash and the front USB device port are found under the front flap on the re-
corder. There is another USB port at the rear of the recorder. The first USB device fitted will
be USB1, therefore the second USB device fitted is USB2.
Compact Flash not available
for the eZtrend QXe.
Back Button
Takes you back to the previous menu

Honeywell X Series Specifications

General

Brand	Honeywell
Model	X Series
Category	Voice Recorder
Language	English