176 43-TV-25-30 Iss.6 GLO Aug 07 UK
Default Password Access
Default password access is set up within the recorder and can be changed by the Adminis-
trator or the Administrator can assign another user to change the access permissions.
Default permissions
• Administrator Access is for the Administrator level only
• Engineer Access is for Engineers and above (Administrator level)
• Supervisor Access is for Supervisors and above (incl. Engineer and Administrator levels)
• Technician Access is for Technicians and above (incl. Supervisor, Engineer and Adminis-
trator levels)
• Operator Access is for Operators and above (incl. Technicians, Supervisors, Engineers
and Administrator levels)
• No Login gives access only to unrestricted areas.
Access levels can change for each menu, for example Operator or above access is required
to get to the Configure menu. Once in the Configure menu the operator level can only ac-
cess the Passwords button, Setup is Technician or above access and Layout and Settings
are Supervisor or above access.
To Next Page
Loading...
Need help?
General
