90 43-TV-25-30 Iss.6 GLO Aug 07 UK
• Count - Only available when Interval, Specific Days or Month End are selected as a
Sub Type. This is how often you want this to occur. The recorder will carry on with this
schedule for the amount entered in the count. Eg. If 24 is entered into the count the
scheduled event will occur at the specified time for 24 hours. A count of zero will carry
on indefinitely.
• Days of the Week - Only available when Specific Days is selected as a Sub Type.
Select the days of the week when this scheduled event is to occur.
• Time of Day - Only available when Specific Days is selected as a Sub Type. Select the
Time Of Day when this scheduled event is to occur.
User Counters
User Counters are quite simply counters that are set up by the user. User Counters can be
used as a Cause to trigger an Event Effect. The User Counter information must be setup in
the before it can be used as a part of the event system. See “Counters Menu” on
page 98.
For a User Counter to be used as a Cause, a User Counter must already be set up and be
counting something. eg. a User Counter as an Effect of another Event.
An example of this could be:
First setup your counter in the Counters menu. Enable it, Name it, enter the number the
count will Start At and enter at what number it will Rollover and start again. See “Counters
Menu” on page 98.
Event 1 has been set up with Cause 1 as a Scheduled interval every 30 seconds. The Effect
is that User Counter 1 is set to increment by 1. When the scheduled interval occurs, every
30 seconds, Counter 1 will increment by 1.
Event 1 example
Cause = Scheduled interval every 30 seconds
Effect = User Counter increments by 1
To Next Page
Loading...
Need help?
General
