43-TV-25-30 Iss.6 GLO Aug 07 UK 159
Maintenance
(Main Menu > Status > Maintenance)
The recorder keeps track of important “life actions” for improved diagnostics and preventa-
tive maintenance notification.
The Maintenance button will become active when Health Watch/Maintenance is selected as
a firmware option. To enable this go to “Options” on page 157.
Once enabled this screen will keep the following information:
• Powered on - How many times the recorder has had the power turned on
• Last Power up - The last time the recorder had been turned on
• Time On since power up - The amount of time since the recorder was last turned on
• Last Setup Modified - displays the last Day, Month and Time the setup was last modi-
fied.
• Total On time - How much time the recorder has had the power turned on
• Total Off time - How much time the recorder has had the power turned off
• Longest Off time - How long was the longest time period the recorder was powered off
• Lithium cell life - Approximately how much battery time is left
• Backlight Life - Approximately how many hours of Back light time left
• Compact Flash - How many times the Compact Flash card has been inserted
• Lowest temperature - Displays the lowest ambient temperature detected so far
• Highest temperature - Displays the highest ambient temperature detected so far
• AI last factory cal * - When the last factory calibration was made to this Analogue Input
card. Eg. in card slot A
• AI last user cal *:* - When the last user calibration was made to this Analogue Input
card. Eg in slot position A, input 1. All channels will be listed per channel.
To Next Page
Loading...
Need help?
General
