43-TV-25-30 Iss.6 GLO Aug 07 UK 137
Alarms Menu
(Main Menu > Alarms >)
Acknowledge and Configure Alarms by categories.
Acknowledge Alarm
(Main Menu > Alarms > Acknowledge Alarm)
User acknowledgment of alarms can be performed at this menu, only Latched alarms can
be acknowledged. Normal alarms cannot be acknowledged.
When a Latched alarm is set up in the Pen, Alarms menu and a latched relay is configured,
it will maintain its active state until the alarm has been acknowledged.
A latched alarm will continue to flash, if an alarm marker is displayed, until it is acknowl-
edged and it is out of alarm state. See “Alarm Markers” on page 196 for flash colour iden-
tification.
Ack Alarm
• All - Select this button to acknowledge all active latched alarms.
• By Group - Select this button to acknowledge latched alarms in a group of pens. Pen
groups can be set up in the Pens menu
• By Pen - Select this option to acknowledge latched alarms for individual pens.
Configure
(Main Menu > Alarms > Configure)
This is a short-cut to change alarm levels, this will display all available pens with alarms set
up. To change the configuration, select the desired pen, this will display the alarm details.
Select the Edit button to change the alarm level. If the Edit button is greyed-out go to the
Pens > Alarms menu and select the relevant alarm number, then activate Allow Change.
View
(Main Menu > Alarms > View)
This will display all available Pens with alarms set up. To view the configuration, select the
desired pen, this will display the alarm details.
To Next Page
Loading...
Need help?
General
