HP 8590 E-Series User Manual

Initial Inspection
Inspect the shipping container for damage. If the shipping container or cushioning material is
damaged, keep it until you have verified that the contents are complete and you have tested
the spectrum analyzer mechanically and electrically.
Table l-l contains the accessories shipped with the spectrum analyzer. If the contents are
incomplete or if the spectrum analyzer does not pass the verification tests in the calibration
guide, notify the nearest Hewlett-Packard office. If the shipping container is damaged or the
cushioning material shows signs of stress, also notify the carrier. Keep the shipping materials
for the carrier’s inspection. The HP office will arrange for repair or replacement without
waiting for a claim settlement.
If the shipping materials are in good condition, retain them for possible future use. You may
wish to ship the spectrum analyzer to another location or to return it to Hewlett-Packard for
service. See “How to Return Your Analyzer for Service,”
in Chapter 9 for more information
about shipping materials.
Note
If cleaning is necessary, use a damp cloth only.
lhble l-l. Accessories Supplied with the Spectrum Analyzer
Description
HP Part Number
32-kilobyte Memory Card 0950-1964
Memory Card Holder 9222-1545
Adapter, Type N (m) to BNC (f) 1250-0780
Two Adapters, BNC (m) to BNC (f)
1250-0076
Adapter, BNC (m) to SMA (f)
HP 1250-1700
Connector, APC-3.5 mm (f) to (f) HP 5061-5311
Reference Connector 1250-1499
Zable, 5OQ, BNC 8120-2682
Zable, SMA (m) to type N (m) 8120-5148
Zable, 750, BNC
5062-6452
Zable, SMA (m) to SMA (m)
08592-60061
‘ower cable
See Table 1-3
Comments
Shipped with analyzer. HP 859OL, HP 8592L,
and HP 8594L must include Option 003.
Shipped with analyzer. HP 859OL, HP 8592L,
and HP8594L must include Option 003.
Not shipped with Option 001. Two adapters
are shipped with Option 010.
Shipped with Option 105 only. The adapters
can be used to connect cables to the
rear-panel connectors.
Shipped with Option 026 only.
Shipped with Option 026 only.
Shipped connected between the 10 MHz REF
OUT and the EXT REF IN on the rear panel of
the analyzer. Not shipped with HP 8590L
option 713.
Not shipped with Options 001, 011, or 026.
Shipped with HP 8592L, HP 85933, and
HP 85963. Not shipped with Option 026.
Shipped with Options 001 or 011 only.
Shipped with Option 026 only.
Shipped with analyzer.
Preparing For Use 1-3

HP 8590 E-Series Specifications

General

Brand	HP
Model	8590 E-Series
Category	Measuring Instruments
Language	English