HP 8590 E-Series User Manual

6. If accurate self-calibration is needed temporarily in a different environment, use
CAL FREQ t AMPTD , but do not press CAL STORE . The temporary correction factors will be
used until the spectrum analyzer is turned off or until CAL FETCH is pressed.
Memory Card Insertion and Battery Replacement
The memory card reader is available for the HP 859OL, HP 8592L, and HP 8594L as Option 003.
Use the following information to ensure that the memory card is inserted correctly. Improper
insertion causes error messages to occur, but generally does not damage the card or instrument.
Care must be taken, however, not to force the card into place. The cards are easy to insert
when installed properly.
1. Locate the arrow printed on the card’s label.
2. Insert the card with its arrow matching the raised arrow on the bezel around the
card-insertion slot. See Figure 2-7.
Figure 2-7. Inserting the Memory Card
3. Press the card into the slot. When correctly inserted, about 19 mm (0.75 in) of the card is
exposed from the slot.
Getting Started 2-l 9

HP 8590 E-Series Specifications

General

Brand	HP
Model	8590 E-Series
Category	Measuring Instruments
Language	English