HP 8711C User Manual

I
-
I
-
Using Instrument Functions
Using Markers
To Use Other Marker Functions
To Use Marker to
Center Frequency
This function changes the analyzer’s center frequency to that of the active
marker and limits the span if necessary. If the markers are all off, and this
function is selected, it first turns on marker 1 at its previous setting or, if no
previous setting, at the center frequency (default).
1. Press (jj] and then use the front panel knob or the numeric keypad
to move the marker to 200 MHz.
2. Press ME&SW FWICIACULS Maker -> Gears and note that the trace
has now shifted and that the center frequency of the analyzer is now
200 MHz.
To Use Marker to
Reference
This function changes the value of the analyzer’s reference level to the
amplitude value of the active marker. This function does not change the
reference pmkbn. If the markers are all off, and this function is selected, it
hrst turns on marker 1 at its previous setting or, if no previous setting, at the
center frequency (default).
1. Press @iiKE] and then use the front panel knob or the numeric keypad
to move the marker to about - 10 dB.
2. Press Marks Func%fans Marker -2 Ref erenCe and note that the
trace has now shifted up and that the marker is exactly on the reference
level.
4-28
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English