I
-
Saving
Measurement
Results
After measuring a device, you will probably want to save the measurement
results in order to perform statistical analysis on them. Statistical quality
control (SQC) can be a powerful tool to indicate process drift or variation.
You may also want to produce a print or plot of the
DUT’s
response, and ship
this to your customer along with the DUT.
Querying
Measurement
Data
To save the complete measurement trace, use the SCPI command:
CALCl:DATA?
or
TRACEl:DATA?
CHlFDATA
Refer to the chapter titled “Trace Data Transfers” in the Programmer’s Guide
for more details.
From
BASIC,
you can also use
Read-fdata(
),
which is faster. Refer to the
chapter titled “Using Subprograms” in the supplement to the
HP Instrument
BASIC User’s Handbook.
7-72
-
I-
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com
To Next Page
Loading...
Need help?
General
