I
-
I
-
Front/Rear Panel
Connectors
RF
Connectors
REFLECTION
RF OUT
The standard front panel RF OUT connector is a female type-N 50
Q
connector. When Option
1EC
is ordered, this front panel connector is a
female type-N 75
n
connector.
This port outputs the RF signal and also serves as an input for reflection
measurements.
TRANSMISSION
RF IN
The standard front panel RF IN connector is a female type-N 50
fl
connector.
When Option
1EC
is ordered, this front panel connector is a female
type-N 75
fI
connector.
This port receives the RF signal for internal transmission measurements.
CAUTION
While 50
fl
and 75
61
Type-N connectors are similar in appearance, they are
not
compatible. 75
6)
type-N connectors have a smaller center pin. Connector
damage can result if you attach a 50 0 male connector to a 75
fl
female
connector.
To
adapt from 50
fI
to 75
0,
always use a minimum loss pad:
l
For adapting from 50
Q
female to 75
D
female use an HP
11852B,
Option 004, minimum loss pad.
l
For adapting from 75
0
female to 50
Q
female, use a standard HP
11852B
minimum loss pad.
8-13
-1
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com
To Next Page
Loading...
Need help?
General
