HP 8711C User Manual

I
-
I
-
Using Instrument Functions
Connecting and Configuring Printers and Plotters
Define the Printer or Plotter Settings
You will only have to do this setup once if you make all your hardcopies with
the same printing or plotting device.
Press (HARDCOPY) and then Define PCLS , Def in& Prizlter , or
I.Iaf ina PLatter , depending on which type of device you are using. Note
that only one of these choices is selectable at a time.
Three procedures follow. Use “Defining a PCL5 Printer” or “Denrung a
Printer” if you are using a printer. Otherwise, go to “Defining a Plotter.”
Defining a PC15 Printer
Make the following selections in the analyzer menus:
1. Press Restorra Defaults to restore the default parameters for a printer.
The defaults are:
Parameter
Monochrome/Color
Orientation
Auto Feed
Top Margin
left Margin
Print Width
Default
Monochrome
Portrait
ON
0.00 mm
0.00 mm
150 mm 15.91 in1
2. Select the type of printer you have: either Mono&x~m~ or C&or .
3. Select the orientation of the paper to the information printed, either
PoHxait or Lanrfscape .
The portrait choice orientates the printout
vertically, the landscape orientates the printout horizontally.
4. If you do not want auto feed active, press Auto Pesd Off .
4-82
I-
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English