HP 8711C User Manual

I
-
Automating Measurements
Measurement Setup and Control with Fast Recall
5. The fast recall feature utilizes only the hrst seven hles listed that contain
instrument state, calibration or measurement data.
6. If you have not previously saved any Eles to this disk, you many want to
save a few instrument states now, to follow along.
7. Press P;E*~oz MBEU FastRac&Ll cuff QEF . Note that the measurement
display now reappears on the screen and that there are file names next
to the tlrst seven softkeys. (If any of the softkeys are blank, it’s because
you had less than seven flies saved on the disk.)
The flies are placed on the softkeys in the order in which they appear in
the disk’s directory table.
NOTE
You may want to use the I+WW FEle feature to give Your files more meaningful names. See
“Other File Utilities” in Chapter 4 for information on renaming files.
8. To “fast recall” an instrument state, press the softkey next to the file that
contains the instrument state.
9. The fast recall toggle will remain on (even when the analyzer is [REEY))
until manually turned off.
10. With the fast recall feature turned on, you will always be only 1 or 2 key
presses away from recalling an instrument state.
11. With an external keyboard connected to the rear panel DIN connector,
keys Fl through F7 are equivalent to pressing softkeys 1 through 7 on
the analyzer. See “Using a Keyboard” in Chapter 4 for information on
connecting and using an external keyboard.
7-42
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English