HP 8711C User Manual

I
-
I
-
Using Instrument Functions
Using limit Testing
To Move the Pass/Fail
The limit test pass/fail indicator and text can be moved to any position on the
Indicator Text and Icon
display screen.
lb move the position of the pass/fail indicator:
1. Press (DISPLAY_) Limit Mmxu Limit Options .
2. Press Limit Icon X Position and use the front panel knob or the m
@J keys to position the pass/fail indicator along the horizontal axis. You
can also place the indicator along the horizontal by entering a percentage
using the numeric keypad. Enter a whole number from 0 to 100, where 0
represents the far left of the display, and 100 represents the far right of
the display.
3. Press Limit Icun Y Pasi$ion and use the front panel knob or the
@) a keys to position the pass/fail indicator along the vertical axis. You
can also place the indicator along the vertical by entering a percentage
using the numeric keypad. Enter a whole number from 0 to 100, where
0 represents the bottom of the display, and 100 represents the top of the
display.
To Turn the Pass/Fail
You can toggle on or off the pass/fail indicator text (which contains the
Indicator Text end loon measurement channel number and the word “pass” or “fail,” such as 1: FAIL)
On and Off
by pressing (-1 Limit Menu L&nit. OpH6ns Limit Text ON off .
You can toggle on or off the fail icon (there is no “pass” icon-only text) by
pressing @GiX) Limit Menu Limit Opt iuns Limit Icotz ON off .
_I
Using a Marker During Pressing the (KMKi!Q softkey while entering a limit line will activate a
limit Entry
marker. The marker can be used to determine a frequency or level of interest
on the device response.
4-43
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English