To Next Page

To Previous Page

Port Traffic Controls

Overview

Feature Default Menu CLI Web

Rate-Limiting None n/a 13-4 n/a

Guaranteed Minimum Per Queue (1-8 order):

n/a 13-18 n/a

Bandwidth 2%-3%-30%-10%-10%-

10%-15%-20%

Jumbo Packets Disabled n/a 13-26 n/a

This chapter includes:

■ Rate-Limiting: Enables a port to limit the amount of bandwidth a user

or device may utilize for traffic on the switch.

Note In earlier releases, all traffic rate-limiting applied to inbound traffic only,

and was specified as a percentage of total bandwidth. Beginning with

software release K.12.xx or later, it is also possible to configure outbound

rate-limiting for all traffic on a port, and specify bandwidth usage in terms

of bits per second (bps).

■ Guaranteed Minimum Bandwidth (GMB): Provides a method for

ensuring that each of a port’s outbound queues has a specified minimum

consideration for sending traffic out on the link to another device.

■ Jumbo Frames: Enables ports operating at 1 Gbps or 10 Gbps speeds to

accept inbound frames of up to 9220 bytes when configured for jumbo

traffic.

13-3

HP ProCurve Management And Configuration Guide

Other manuals for HP ProCurve