38
(17) Soft start
Sewing speed at the sewing start can be
limited.
Set the sewing speed with [RIGHT ] key
or
[RIGHT ] key
. Setting can be performed up to 6
rotations at the sewing start.
Sewing speed per rotation can be set with
memory switches Nos. 1 to 6.
All machines have been delivered with the
speed set to 600 sti/min.
(18) Number of stitches of the sewing start of thread tension
Number of stitches of the sewing start
section at the time of needle/looper thread
tension setting can be set.
Set the number of stitches with [RIGHT ] key
or
[RIGHT ] key
.
Setting can be performed “0” to 3 stitches.
(19) Number of stitches of the sewing end of thread tension
Number of stitches of the sewing end
section at the time of needle/looper thread
tension setting can be set.
Set the number of stitches with [RIGHT ] key
or
[RIGHT ] key
.
Setting can be performed “0” to 3 stitches.
(20) Copy destination No.
By setting a copy destination No. which
is different from the pattern No. currently
selected, when pressing [READY ] key to
light up the sewing LED, the pattern is copied
in the pattern No. which has been set in the
copy destination No. and stored in memory.
The original pattern is not changed.
When changing the pattern No. without pressing
[READY ] key or turning OFF the power, the
set value is not stored in memory.
1)
When setting the copy destination No. and pressing [READY ] key, the pattern No. specified in the copy
destination No. is stored in memory.
The original pattern data cannot be changed.
2) Set the pattern No. with [RIGHT ] key
or [RIGHT ] key
. The No. can be set 1 to 89.
Pattern located in the copy destination is overwritten. So, be careful.
To Next Page
Loading...
Need help?
General
