55
ENGLISH
(10) Cleaning
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
(11) Draining
When polyethylene oiler
under the bottom cover
becomes filled with oil, remove it and drain the oil.
WARNING :
Be sure to fully dry and install the filter af-
ter washing it.
Be sure to remove thread waste or dust collected
since the thread waste may be sewn together with
the sewing product.
For J/C types, thread waste occurs every
time of sewing since the short thread
remaining function works.
Perform cleaning of the machine once in
half a day to a day.
(12) Checking the fan filter
Clean filter
of the control box fan once
every week.
1) Pull screen kit
in the direction of the arrow to
remove it.
2) Wash filter
under running water.
3) Reinstall filter
and screen kit
in place.
DANGER :
Be sure carry out the work while observing the following in order to protect against pinching of
hands, fingers and arms between the sewing machine and the bottom cover, which can result in
serious injury, when you raise the sewing machine from its home position.
• Be sure to lock the hinge stopper to firmly secure the sewing machine in its raised position.
* Read and check how to rise/return the sewing machine described on p.3 to p.5.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
To Next Page
Loading...
Need help?
General
