8.7 Specific settings for the TsC20-Duo
When two coding units are connected to one controller TsC20-Duo, the following settings should be made
for each individual coding unit.
Printer settings
• Low ink prints
• Product direction [X54 / X72]
• Rank voltage [X72]
• Offset voltage [X72]
Signaal instellingen
• Print missed action
Label settings
• Orientation
• Stretch
Print settings
• Print delay
• Speed
• Print quantity
• Spit enable
• Spit delay
• Spit interval
• Spit lines
All other parameters are global parameters. Whether coding unit A or B is selected does not matter, once
they are changed they will have effect on both coding units at the same time.
To Next Page
Loading...
Need help?
General
