APPENDIX E , NICELABEL DRIVER TUTORIALS
H550 AE Rev.: 007 kortho KGJ X-series
In general the following firmware-driver combinations are compatible:
â–ª Driver version: 4.6.63 (Build 3230) and higher
â–ª Minimal Printer Firmware version: V1.0-16032011
For firmware lower than this version, use driver version 4.6.44 or turn the two-way support off at the driver’s port setting.
Installation of the driver
As soon as the compatible driver has been downloaded, it can be installed on the PC/Laptop which is going to control the
printer(s).
Beware:
If the label needs to be downloaded through a USB thumbdrive one should set the driver accordingly, see
Appendix E, Downloading a label through USB. The description below is based on the situation in which the
label is send to the printer through the Ethernet.
To install the driver:
1. Unzip the downloaded file.
2. Start the installation by executing the program PrnInst.exe.
3. Click Next.
4. Accept the conditions and click Next.
5. Select the desired printer and click Next.
To Next Page
Loading...
Need help?
General
