Kortho GraphicJet X Series User Manual

H550 AE Rev.: 007 kortho KGJ X-series
iii
▪ Preface
Welcome to the GraphicJet X-series manual.
Read the manual before you start and read it carefully. This will avoid unnecessary problems and loss of
performance.
This manual is meant for all personnel who are involved with the GraphicJet X-series, which includes the
control units TsC20-X and TsC20-X duo and the coding units X18, X18+, X18si, X54 and X72. The purpose of
this manual is to get familiar with the GraphicJet X-series. This involves operational, safety, transport &
storage, installation, commissioning, fault diagnosis and maintenance instructions.
The general construction for the different types of coding units of the GraphicJet X-series is the same.
Because of this there is no need to show pictures of each individual model. Functions which are typical for a
particular control unit and/or coding unit will be marked by the type identification between brackets e.g.
[TsC20-X duo] if the function is only available for the Control unit TsC20-X duo or [X72] if the function is not
available for the coding unit X72.
All personnel must read the first four sections named INTRODUCTION, TECHNICAL DESCRIPTION,
PRINT PROCESS DESCRIPTION and SAFETY. The other sections provide instructions or information for
different aspects of the GraphicJet X-series.
Keep this manual on a sensible and safe place for future use.
Contact Korthofah BV or your local distributor if you have any questions.
Conventions in this manual:
▪ The GraphicJet X-series will be referred to as the printer.
▪ Any material the printer is used to print on is called substrate.
▪ The customer is the person or company who is the owner of the printer.
▪ Follow the instruction order as indicated when you carry out any of the procedures described.
Instruction format:
1. Instruction. Comment(s).
a. Sub-instruction. Comment(s).
b. Sub-instruction. Comment(s).
2. Instruction. Comment(s).
▪ Symbols in this manual
In this manual, the following symbols are used:
WARNING:
This symbol indicates a potentially hazardous situation which, if instructions are not followed,
could result in death or serious injury.
CAUTION:
This symbol indicates a potentially hazardous situation which, if instructions are not followed, may
result in minor or moderate injury or damage to property.
The statements above are notes for your safety.
Beware:
A notice with useful information for the user in relation to the product. It attends the user to
possible problems.

Kortho GraphicJet X Series Specifications

General

Brand	Kortho
Model	GraphicJet X Series
Category	Printer
Language	English