1 INTRODUCTION
1.1 Qualified personnel
Operators are qualified when they have read and understand sections 1 to 8 of this manual. A specific
preliminary training is not required.
Technicians that carry out repairs and technical maintenance on the printer equipment should have
secondary technical education or comparable technical level of knowledge through practical experience.
Installation or servicing of the printer must only be performed by qualified personnel of Korthofah BV or a
local distributor, which is designated by Korthofah BV.
For customer installations authorisation must be obtained from Korthofah BV or a local distributor, which is
designated by Korthofah BV.
1.2 Elementary personal protection
▪ Use the printer only in a well ventilated area.
▪ Do not eat or drink while working with the ink or cleaner.
When at risk for contact with the ink or cleaner:
▪ Wear chemical resistant gloves.
▪ Use safety goggles or face shield in case of splash risk.
▪ Wear suitable protective clothing as protection against splashing of or contamination with ink or
cleaner.
When installing of servicing the equipment:
▪ Ensure that the host machine is stopped.
▪ Ensure the control unit of the printer is switched off.
Please read the SAFETY section and the SDS of the ink used for more information. The SDS can be
downloaded from the Kortho website (www.kortho.com).
1.3 Intended Use
The GraphicJet X-series are industrial printers and are designed to print directly on substrates e.g.
cardboard, wood and paper. The printers can print labels with fixed and/or dynamic items. Dynamic items
are items like operator input text, number, date and time. Beside text related items, the printer can also print
items such as barcodes, shift-codes and graphics.
The labels can be designed with a PC based design tool or they can de designed on the control unit. The
labels designed with a PC based design tool can be downloaded to the control unit by Ethernet or by USB
thumbdrive. The labels will be stored in the label memory.
Beware:
USB must be formatted as FAT12, FAT16, FAT32, exFAT, TexFAT in order to be supported. The
NTFS file system is not supported in any of the Windows CE versions.
To Next Page
Loading...
Need help?
General
