Lenze i55 Series User Manual

25232 0x6290 Reversal warning Keypad display: Invert rotaon
Cause Error type/response Remedy
•
Negave setpoint selecon with an acve
limitaon of rotaon 0x283A (P304.00).
•
The "Reverse rotaonal direcon"
0x2631:013 (P400.13) funcon was reques-
ted with an acve limitaon of rotaon
0x283A (P304.00).
Warning
•
The motor is brought to a standsll, since a
reversal of the rotang direcon is not per-
missible.
•
Check setpoint selecon and trigger.
•
Check seng in 0x283A (P304.00).
Related topics
4Motor rotang direcon ^ 212
25233 0x6291 Number of maximum permissible faults exceeded Keypad display: Trouble overow
Cause Error type/response Remedy
The number of permied restart aempts aer
a fault set in 0x2839:003 (P760.03) was excee-
ded. The fault occurred to frequently and could
not be reset.
Fault
•
The motor remains at a standsll, no auto-
mac restart is executed.
Check and the eliminate the fault.
Related topics
4Automac restart ^ 484
25248 0x62A0 AC Drive: user fault Keypad display: AC Dr. UserFault
Cause Error type/response Remedy
The "Acvate fault" funcon was triggered via
bit 10 of the LECOM control word 0x400B:002
(P592.02).
Fault Eliminate error cause and then reset error.
25249 0x62A1 Network: user fault 1 Keypad display: Netw.UserFault 1
Cause Error type/response Remedy
The "Acvate fault 1" funcon was triggered via
the NetWordIN1 data word 0x4008:001
(P590.01).
Fault Eliminate error cause and then reset error.
Related topics
4Further process data ^ 251
25250 0x62A2 Network: user fault 2 Keypad display: Netw.UserFault 2
Cause Error type/response Remedy
The "Acvate fault 2" funcon was triggered via
the NetWordIN1 data word 0x4008:001
(P590.01).
Fault Eliminate error cause and then reset error.
Related topics
4Further process data ^ 251
25265 0x62B1 NetWordIN1 conguraon incorrect Keypad display: NetWordIN1 error
Cause Error type/response Remedy
Two bits of the NetWordIN1 data word
0x4008:001 (P590.01) were assigned to the
same funcon.
Trouble Check and correct conguraon of the NetWor-
dIN1 data word.
•
The funcons that are to be triggered via
bits 0 ... 15 of the NetWordIN1 data word are
dened in 0x400E:001 (P505.01) ... 0x400E:
016 (P505.16).
Appendix
Error codes
646

Lenze i55 Series Specifications

General

Brand	Lenze
Model	i55 Series
Category	Inverter
Language	English