EasyManuals Logo
Home>Polaris>Offroad Vehicle>RANGER CREW 900 2014

Polaris RANGER CREW 900 2014 User Manual

Polaris RANGER CREW 900 2014
447 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #358 background imageLoading...
Page #358 background image
9
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
9.5
BRAKE SYSTEM SERVICE NOTES
Disc brake systems are light weight, low maintenance, and perform well in the conditions this vehicle will routinely
encounter. There are a few things to remember when replacing disc brake pads or performing brake system service to
ensure proper system function and maximum pad service life.
DO NOT over-fill the master cylinder fluid reservoir.
Make sure the brake pedal returns freely and completely.
Adjust the caliper stop pin after pad service.
Check and adjust master cylinder reservoir fluid level after pad service.
Make sure atmospheric vent on reservoir is unobstructed.
Test for brake drag after any brake system service and investigate cause if brake drag is evident.
Make sure caliper moves freely on guide pins (where applicable).
Inspect caliper piston seals for foreign material that could prevent caliper pistons from returning freely.
Perform a brake burnishing procedure after installing new pads to maximize service life.
DO NOT lubricate or clean the brake components with aerosol or petroleum products. Use only approved brake
cleaning products.
BRAKES

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RANGER CREW 900 2014 and is the answer not in the manual?

Polaris RANGER CREW 900 2014 Specifications

General IconGeneral
BrandPolaris
ModelRANGER CREW 900 2014
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals