Scalar DLC Reference Guide 103
Field/Button Icon Operation Description
Name Supplied Slot name.
ID Supplied Slot identification number.
Physical coordinate Supplied Slot physical (SCSI) coordinate. Refer to Element
Addressing on page 244.
Robot1 coordinate Supplied The slot coordinate in Robot1 (None means the slot is
assigned to another robot). Refer to Element
Addressing on page 244
Robor2 coordinate Supplied The slot coordinate in Robot2 (None means the slot is
assigned to another robot). Refer to Element
Addressing on page 244
LSCI coordinate Supplied Slot LCSI coordinate. Refer to Element Addressing
on
page 244.
Current cartridge Supplied A cartridge contained in the slot, if any.
State Supplied Slot state (empty/occupied)
Owner Select A slot owner (client). The reserved slot can be used
only by its owner.
None means the slot is not reserved.
Exclusive reservation Supplied The reservation may be either normal (another owner
can un-reserve the slot) or exclusive (only the owner
can change the reservation).
Assigned/Unassigned
Mailboxes
Select and
click
Select mailbox and click arrow button to assign/
unassign the current slot to/from it.
Update Click Save the slot properties after edit.
Reset Alarm flag Click Remove Alarm flag (active only when the slot is in
Alarm state).
Refresh Alarm flag Click Refresh Management GUI for Alarm.
Help Click Open online help for the current pane.
To Next Page
Loading...
Need help?
General