Scalar DLC Reference Guide 163
The Target may work either in SCSI-2 or in SCSI-3 mode. All the LUNs of this target will work in this mode,
too, and this will be the standard for all clients assigned to these LUNs. For the details refer to the SCSI
Primary Commands 2 (SPC-2) and SCSI Primary Commands 3 (SPC-3) manuals.
Depending on the adapter model and the SCSI operating mode, the number of targets pro port and the
number of LUN per target are indicated in Table 23
.
Active LUN Black Indicates a LUN (active).
The SCSI client is configured to use this LUN.
Not active
LUN
Gray Indicates a LUN (not active).
The SCSI client is not configured to use this LUN.
Table 23 SCSI and Fibre Channel Adapter Target-LUN Settings
Adapter Type Max target Max SCSI ID Max LUNs per target
LSI 20860 SCSI 7 7 8
LSI 8751D SCSI 15 15 8
LSI 8951U SCSI 15 15 8
QLA 2200 Fibre Channel 1 1 256 (8)
a
a. Indicated max LUN number in SCSI-3 (SCSI-2) mode.
QLA 23xx Fibre Channel 1 1 256 (8)
Local SCSI 128 128 255 (8)
Table 22 SCSI Target Icons (Continued)
Name Icon Text Color Description
To Next Page
Loading...
Need help?
General