Scalar DLC Reference Guide 263
DAS Commands
DAS commands are divided into:
• Media management
• DAS management
• Client management
• Scratch management
All these commands are called from dasadmin.
Note
The dasadmin application provides a brief help by entering the -h option.
Table 37 Media Management
Command Explanation
carry moves volser from one slot to another.
catf catalogs foreign media.
cellinfo displays information about devices and cartridges in the system.
clean cleans drive.
dismount removes a medium from a drive and returns it to its home position.
eif_conf returns an information of logical ranges configured in the insert/eject area.
eif_info returns an information of logical ranges configured in the insert/eject area.
eject ejects a limited number of media from the library.
eject2 ejects media from the library.
eject3 ejects media from the library.
ejectcl ejects used cleaning media from the library.
ejectcom ejects media from the library completely.
flip flips the optical disk in the drive.
getvolsertodrive displays the configured assignment of volsers to drives.
getvoltoside displays information on the association of volsers to an optical disk.
insert inserts a few cartridges in the library.
insert2 inserts many cartridges, including cleaning cartridges, in the library.
inventory checks and corrects the whole library system database.
mount loads medium into a drive.
partinventory checks and corrects part of the library system database.
pool_list provides information about clean/scratch pools in the system.
To Next Page
Loading...
Need help?
General