Scalar DLC Reference Guide 279
KEC Moves a cartridge from drive to a given position.
LJB Moves a cartridge to the I/O area of a integrated Jukebox.
MAN Switches from automatic mode to the manual or test mode.
MO Moves a cartridge to a drive from archive or the Insert/Eject unit.
MOCL Initiates a drive cleaning.
MV Moves a cartridge from archive or Insert/Eject unit to a coordinate in the
archive or insert/eject unit.
ROPO Moves the robot to the given coordinate.
ROSA Displays and change the library status to online.
ROSO Moves the robot to a park position and set the status to not ready.
SCH Sends the information of the first occupied compartment to the requester.
SIN Stops the running insert command.
SIVK Stops the running inventory command.
SWIT Toggles the library status passive-active.
UJB Unloads the I/O unit of a integrated Jukebox.
ULC Displays a archive catalog entry by a given coordinate.
ULK Displays a archive catalog entry by a given coordinate.
ULU Performs the robot to press button(s) on the drive.
ULV Displays a archive catalog entry by a given volser.
UPC Changes the archive catalog entry by a given coordinate.
UPK Changes the archive catalog entry by a given coordinate.
UPV Changes the archive catalog entry by a given volser.
VI Inserts the first available Cartridge in the Insert area to the archive.
VICC Inserts the cartridge from a given coordinate to a given target coordinate.
Note
The configuration of clean pools and insert/eject areas should be executed via the Scalar
DLC Management GUI. Refer to Create Pool
on page 109 and Create Mailbox on page
110
Table 41 ROBAR Commands (Continued)
Command Description
To Next Page
Loading...
Need help?
General