Roland VS-2400CD User Manual

13—Operating the Hard Disk Recorder
Roland VS-2400CD Owner’s Manual www.RolandUS.com 175
Setting Loop Points Using Locators
You can learn about locators on Page 179. The following steps presume you’ve already
placed locators at the beginning and end of the section you want to loop.
1. Press LOCATOR—so it’s lit—and select the locator bank containing the locators
you’ve placed at the start and end of the section you want to loop.
2. Press the locator positioned at the start of the section.
3. Hold down LOOP and press FROM.
4. Press the locator positioned at the end of the section.
5. Hold down LOOP and press TO.
Setting Loop Points Using Markers
Markers are described on Page 182. Before setting your Loop FROM and TO points,
place markers at the beginning and end of the section to be looped.
1. Move to the marker located at the start of the section.
2. Hold down LOOP and press FROM.
3. Move to the marker located at the end of the section.
4. Hold down LOOP and press TO.
Editing Loop FROM and TO Points Manually
You can edit, clear and place Loop Punch FROM and TO points on the AUTO PUNCH/
LOOP screen in the UTILITY MENU.
1. Hold down SHIFT and press LOOP—the AUTO PUNCH/LOOP screen appears.
You can do a few things with your Auto Punch IN and OUT points on this screen:
• You can use the cursor buttons and Time/Value dial, or your mouse, to change
either point’s location by time code or measures and beats.
• You can select FROM or TO on the screen and press F2 (CLEAR) to erase its
current time assignment.
• You can grab the now line’s current position as a new FROM or TO point. Select
FROM or TO on the screen and click F3 (GetNow).
• You can move the now line to an FROM or TO location by selecting FROM or
TO on the screen and clicking F4 (GO TO).
2. Press EXIT when you’re done to confirm your changes.
Activating Looped Playback
1. Move the now line to a location shortly before the section you’ll be looping.
2. Press LOOP so it’s lit.
3. Press PLAY—when the VS-2400CD reaches the LOOP TO point, it starts over again
at the LOOP FROM point, playing the looped section over and over again.
4. Press STOP to halt playback.
5. To turn looping off, press LOOP so it’s not lit.
Loop IN time
Loop OUT time
VS2400OMUS.book 175 ページ ２００６年２月２８日 火曜日 午前１１時１２分

Roland VS-2400CD Specifications

General

Brand	Roland
Model	VS-2400CD
Category	Musical Instrument
Language	English