Roland VS-2400CD User Manual

33—VGA Main Display Mixer Views
432 www.RolandUS.com Roland VS-2400CD Owner’s Manual
Multi-Channel View Track Channels
1. V-Track Selector
2. PHASE (INV) Button
3. ATT Knob
4. DYNAMICS (DYN) Switch and Overview
5. EQ Switch and Overview
6. AUX Send Sliders
7. DIR (DIRECT) 1-8 Buttons
Click the V-Track signal selector to assign the
desired V-Track to the track channel.
Click the PHASE button so it lights to reverse the
phase polarity of the input channel’s signal.
Drag the ATT slider to adjust the level of the
signal coming into the channel. The signal’s level
is shown to the left of the knob.
Turn on the channel’s dynamics processor by clicking the DYN
switch so it lights. The currently selected type of dynamics
processor is shown beneath the switch along with the current
dynamics curve.
Turn on the channel’s EQ by clicking the EQ switch so it lights. The
current EQ curve appears below the switch.
Set the amount of the channel’s signal sent to an Aux bus by adjusting
the corresponding AUX send slider. With linked Aux busses, a panning
handle replaces the even-numbered Aux bus’s slider (Page 425).
To route the channel’s signal to a Direct path, click the desired bus’s
number.
1.
4.
11.
12.
14.
15.
5.
7.
2.
3.
6.
8.
10.
13.
9.
147
150
148
149
149
148
151
VS2400OMUS.book 432 ページ ２００６年２月２８日 火曜日 午前１１時１２分

Roland VS-2400CD Specifications

General

Brand	Roland
Model	VS-2400CD
Category	Musical Instrument
Language	English