Roland VS-2400CD User Manual

2—Getting Around
48 www.RolandUS.com Roland VS-2400CD Owner’s Manual
The Rear Panel of the VS-2400CD
1—POWER Switch
Use the POWER switch to turn the
VS-2400CD on and off.
2—AC IN Jack
Connect one end of the supplied AC
power cord to a grounded AC outlet,
and the other end to the AC IN jack.
3—Cooling Fan Exhaust Vent
The VS-2400CD contains a cooling fan that prevents it from overheating. The fan expels
hot air through this exhaust vent.
4—PS/2 KEYBOARD and MOUSE Jacks
Connect a PS/2 ASCII keyboard (purchased separately) and mouse to the PS/2
KEYBOARD and MOUSE jacks, respectively. See Page 62.
Don’t simply flip the POWER switch
when you want to shut down the
VS-2400CD—if you do this, data loss
may occur. Make sure to use the
proper shutdown procedure,
described on Page 78.
Use only the supplied AC power cord to prevent damage to your VS-2400CD.
Be sure never to block the cooling fan exhaust vent. If hot air from the VS-2400CD
chassis isn’t allowed to escape through this vent, the VS-2400CD may overheat and be
damaged.
PS/2, ASCII
1
2
3
8
109111213
456 7
VS2400OMUS.book 48 ページ ２００６年２月２８日 火曜日 午前１１時１２分

Roland VS-2400CD Specifications

General

Brand	Roland
Model	VS-2400CD
Category	Musical Instrument
Language	English