33—VGA Main Display Mixer Views
422 www.RolandUS.com Roland VS-2400CD Owner’s Manual
FADER Select Indicator
On the VGA, a colored line appears beneath the set of channels currently assigned to
the VS-2400CD’s physical channel strips. These channels are selected by pressing the
corresponding FADER button on the VS-2400CD (Page 134), or by clicking the virtual
FADER buttons in the Multi-Channels Strip view’s MASTER fader strip (Page 428). This
allows you to tell at a glance if the channel strips you’re viewing on the VGA are
currently being controlled by the 12 physical channel strips.
When a set of input channels are selected with the FADER buttons, they’re underlined
in amber. When track channels are selected, the underline is green. Aux 1-8 and FX
return channels are underlined in red when they’re being controlled by the faders.
Aux Send Sliders
In the Input Mixer/Master Block, Track Mixer/FX Return Mixer and Multi-Channel
views, input, track and FX return channels all sport Aux send sliders. These sliders
allow you to send the desired amount of a channel’s signal to any of the eight Aux
busses, and show you at a glance each send level. To set an Aux send level, click and
drag its slider with your mouse to the desired position.
A slider’s color provides information about its
Aux send. When a slider is:
•
blue
—the Aux send is on and set to Post.
•
red
—the Aux send is on and set to Pre.
•
gray
—the Aux send is turned off.
•
black
—the send is turned all the way down.
You can change the Aux bus’s pre/post setting:
• on any channel’s VGA CH VIEW screen (Page 413).
• in the Input Mixer/Master Block view (described on Page 423).
• in the MASTER EDIT window available in the VGA main display’s MIXER menu
(Page 390).
• in the track controls area in the playlist (Page 402).
When an odd/even pair of Aux busses is linked, the slider for the even bus is replaced
by a panning handle, as described on Page 425.
Amber indicator for input channels Green indicator for track channels
Red indicator for Aux master channels Red indicator for Fx return channels
Blue=On, Pst
Red=On, Pre
Gray=Off
Black=No level
VS2400OMUS.book 422 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
Need help?
General
