Roland VS-2400CD User Manual

30—VGA Main Display Universal Elements
396 www.RolandUS.com Roland VS-2400CD Owner’s Manual
The VGA Input Clipping Indicators
The VGA main display’s input clipping indicators light
when an input channel’s analog input signal is too loud.
The INPUT PEAK LEVEL parameter sets the level at which
they light—see Page 356.
VGA F Buttons
Status Strip
The status strip contains flashing indicators that signal the activation of certain features
and modes that might not otherwise be visually obvious.
VGA Remaining Space Status Strip
The F buttons beneath the VGA main display’s content pane (Page 382)
mirror the current behavior of the F buttons beneath the VS-2400CD’s
internal LCD, as does its PAGE button. You can click the VGA’s F buttons
or the LCD’s at any time with the same results.
PAGE shows the number of screens associated with the current display.
You can move from page to page by pressing  and  .
If you prefer, press F1-F6 on a connected ASCII keyboard instead of clicking with your
mouse or pressing the VS-2400CD’s physical F buttons. Use Tab as your PAGE button.
When: The status display flashes:
one or more channels are soloed “SOLO” in blue
one or more channels are muted “MUTE” in yellow
Mastering Room playback is turned on “MASTERING PLAY” in green
Mastering Room recording is turned on “MASTERING REC” in red
Automix recording is turned on “AUTOMIX REC” in red
The VGA Remaining Space strip shows you how much free hard disk
space remains on your internal hard drive. The gauge graphically shows
the remaining space in bright green. You can select how the readout
shows the amount of free space left by setting the REMAIN DISPLAY
TYPE parameter.
PAGE
F
b
uttons
66, 67
Remaining space gauge
Remaining space readout
359
VS2400OMUS.book 396 ページ ２００６年２月２８日 火曜日 午前１１時１２分

Roland VS-2400CD Specifications

General

Brand	Roland
Model	VS-2400CD
Category	Musical Instrument
Language	English