Roland VS-2400CD User Manual

20—Region Editing Operations
Roland VS-2400CD Owner’s Manual www.RolandUS.com 267
IMPORT
Use: Mouse, TRACK menu
You can import a track from another project recorded using the same
sampling rate and recording mode as the current project.
When you select IMPORT, the VS-2400CD scans the selected drive and presents you a
list of all projects that contain importable audio.
Select the desired project and press F5 (OK). On the screen that appears, you can select
the track you want to import, and the track in the current project on which you want to
place the imported audio.
To return to the main IMPORT screen, press F1 (<<BACK).
Why You’d Use Region IMPORT
IMPORT lets you share favorite recordings between projects, or create new projects
based on previously recorded source materials.
SOURCE
Turn the Time/Value dial to select the track you want to import.
DESTINATION
Turn the Time/Value dial to select the track in the current project on which you want to
place the imported audio.
You can import CDR-mode disk-image audio (Page 332) into any project, regardless of
its sampling rate or recording mode. If the project uses the CDR mode, you can import
the image to any V-Tracks. Otherwise, you can import it only to unused V-Tracks
belonging to Tracks 23 and 24. CDR-recorded audio is always stereo, so it’s imported to
two tracks—when you select a destination track, its odd/even partner is also selected.
TRACK menu
F2 (IMPORT)
The source
project and
source track
The destination
project and
destination track
VS2400OMUS.book 267 ページ ２００６年２月２８日 火曜日 午前１１時１２分

Roland VS-2400CD Specifications

General

Brand	Roland
Model	VS-2400CD
Category	Musical Instrument
Language	English