26—Mastering and CD-R/RW Operations
Roland VS-2400CD Owner’s Manual www.RolandUS.com 349
3. To select a V-Track for export on the Select Track screen, turn the Time/Value dial to
highlight the V-Track and press F4 (MARK) to place a checkmark next it. You can
toggle on or off the selection status of all V-Tracks that contain data by pressing F3
(ALL)—this can be handy if you want to export all of your tracks as .WAV files.
4. To select a V-Track on the V-Track Map screen, press F2 (MAP)—the TRACK
EXPORT V-Track Map screen appears.
Each V-Track with audio appears as a small black square with a checkbox to its left.
5. To select a V-Track for export, cursor to the V-Track and press F4 (MARK) to check
its checkbox. As on the Select Track screen, you can select and unselect all of the
V-Tracks at once by pressing F3 (ALL).
6. When you’ve selected all of the V-Tracks you want to export, press F5 (NEXT) to go
to the WAV Export CD burning screen, described on Page 350.
Exporting Phrases as .WAV Files
1. Insert a blank CD-R or CD/RW into your CD burner.
2. On the CD-RW MASTERING MENU screen (Page 341), press F6
(PhrExp) for “Phrase Export”—the PHRASE EXPORT screen appears.
On this screen, you can select the phrases you want to export as .WAV files. Every
phrase that’s currently touching the now line appears at the top of the screen in the
phrase-selection area. If a phrase you want to export isn’t available for selection,
turn the Time/Value dial so that the now line touches the phrase.
Turning the Time/Value dial takes you through each of the project’s V-Tracks. Hold
down SHIFT as you turn to jump between same-numbered V-Tracks on different tracks.
To quickly select or unselect all of a track’s V-Tracks, cursor all the way to the left so that
the track’s name is highlighted and press F4 (MARK).
F6 (PhrExp)
Phrase-
selection
area
Playlist
VS2400OMUS.book 349 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
Need help?
General
