Roland VS-2400CD User Manual

13—Operating the Hard Disk Recorder
188 www.RolandUS.com Roland VS-2400CD Owner’s Manual
• You can grab the now line’s current position as a new IN or OUT point. Select
IN or OUT on the screen and click F3 (GetNow).
• You can move the now line to an IN or OUT location by selecting IN or OUT on
the screen and clicking F4 (GO TO).
2. Press EXIT when you’re done to confirm your changes.
Performing an Auto Punch
1. Set your Auto Punch IN and OUT points as described above.
2. Press A.PUNCH so it’s lit.
3. Move to a convenient location in the project before the location you want to punch.
4. Press the track’s TRACK STATUS button so it flashes red.
5. Press REC so it flashes red.
6. Press PLAY.
When the now line reaches the punch-in point recording automatically begins and
the TRACK STATUS and REC buttons light solidly red. When the now line gets to
the punch-out point, recording automatically stops and the TRACK STATUS and
REC buttons resume flashing.
7. To turn Auto Punch off, press A.PUNCH so it’s not lit.
VS2400OMUS.book 188 ページ ２００６年２月２８日 火曜日 午前１１時１２分

Roland VS-2400CD Specifications

General

Brand	Roland
Model	VS-2400CD
Category	Musical Instrument
Language	English