Siemens SITOP PSU8600 User Manual

Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
325
7.8.6.14
OPC UA Server
Display name
Data type
Definition
Description
OPCUAServerEnableSetpoint
Boolean
PropertyType
OPC UA server activated
OPCUAServerPortSetpoint
UInt16
PropertyType
OPC UA server port
OPCUAUnencryptedAccess
EnableSetpoint
Boolean PropertyType Unencrypted access activated
7.8.6.15
Outputs
ActualState
Note
The same parameters are available for the output at the basic unit
- and for the outputs of
the connected expansion module
s.
Display name
Data type
Definition
Description
ActualCurrentLimit Float AnalogItemType Response threshold of the output
current
ActualCurrentThreshold Byte AnalogItemType Prewarning threshold output cur-
rent
ActualOperatingMode
Byte
AnalogItemType
Operating mode
ActualTargetVoltage
Float
AnalogItemType
Setpoint output voltage
MaxOutputCurrent
Float
AnalogItemType
Maximum output current
OperationState Sitop_Output
OperationState
PropertyType Operating state
OutputCurrent
Float
AnalogItemType
Output current
OutputLed
Object
1)
Sitop_8600_LedType
State of the output LED
OutputVoltage
Float
AnalogItemType
Output voltage
1)
with variables "Colour" and "State"
Alarm
Display name
Data type
Definition
Description
Alarm_F_ChannelOverload
Boolean
Sitop_8600_AlarmType
Overload shutdown of the output
Alarm_F_ChannelOvertemperature Boolean Sitop_8600_AlarmType Output switched off due to over-
heating.
Alarm_F_ChannelSafetyShutdown
Boolean
Sitop_8600_AlarmType
Safety shutdown of the channel
Alarm_F_ChannelClass2Shutdown Boolean Sitop_8600_AlarmType Output was switched off due to an
exception according to NEC Class
2

Siemens SITOP PSU8600 Specifications

General

Brand	Siemens
Model	SITOP PSU8600
Category	Power Supply
Language	English