Siemens SITOP PSU8600 User Manual

Engineering and remote access
7.10 Parameter write behavior of the SITOP PSU8600
Power supply system SITOP PSU8600
350 Manual, 09.2018, A5E36758446-5-76
7.10.2
Retentively saved PROFINET data sets in the RUN mode
Index
Slot
Subslot
Data set
Type
Description
Data size
48 0 1 PROFIenergy values Reading PROFIenergy settings of the
SITOP PSU8600.
36 bytes
Writing Adjustable PROFIenergy parameters of
the SITOP PSU8600.
49 0 1 PROFIenergy channel
list
Reading /
writing
PROFIenergy pause configuration of
the power supply system (outputs,
which are switched off during a
PROFIenergy pause).
8 bytes
53 0 1 Web server values Reading Web server settings of the
SITOP PSU8600.
6 bytes
Writing Adjustable parameters for the web
server of the SITOP PSU8600.
54 0 1 OPC UA values Reading OPC UA settings of the
SITOP PSU8600.
4 bytes
Writing Adjustable parameters for the OPC UA
interface of the
SITOP PSU8600.
55 0 1 NTP client settings Reading NTP client settings of the
SITOP PSU8600.
66 bytes
Writing Adjustable parameters for the
NTP client of the SITOP PSU8600
56 0 1 NTP client status Reading Time of the last synchronization - time
of the next synchronization
40 bytes
57 0 1 ProfiNet security en-
hancement settings
Reading Parameters relating to security 2 bytes
Writing Adjustable parameters relating to secu-
rity
Index 48: PROFIenergy settings (reading)
Data
Description
Data type
Enable PROFIenergy on this device
Enable PROFIenergy on this device
Unsigned8
Padding
Fill byte(s)
3xUnsigned8
TimeToPause
-
Unsigned32
TimeToOperate
-
Unsigned32
Minimum dwell time [ms]
-
Unsigned32
Maximum dwell time [ms]
-
Unsigned32
Power consumption in saving mode [kW]
-
Float
Power consumption during operation [kW]
-
Float
Energy consumption to pause [kWh]
-
Float
Energy consumption to operation [kWh]
-
Float

Siemens SITOP PSU8600 Specifications

General

Brand	Siemens
Model	SITOP PSU8600
Category	Power Supply
Language	English