Engineering and remote access
7.12 SITOP Manager
Power supply system SITOP PSU8600
356 Manual, 09.2018, A5E36758446-5-76
Using the SITOP Manager, you can execute the following most important tasks:
● Commissioning and monitoring the SITOP UPS1600 and PSU8600
● Engineering several SITOP UPS1600 and PSU8600 online
● Engineering several SITOP UPS1600 and PSU8600 offline
● Controlled run down of buffered IPC systems (IPC 24 Volt)
● Backup project configurations for archiving and transfer
● Secure data exchange and communication
By specifying additional applications and alarms, you define a comprehensive protection
concept for your computer or computer network.
The SITOP Manager is an engineering and monitoring tool for SITOP devices with
communication interface. The SITOP Manager comprises three modular components, which
can be individually installed and operated: SITOP Manager Service (MGR), SITOP
Shutdown Service (SDS) and SITOP Gateway Service (GWS).
Each module is a Windows service, which runs in the background. These services can be
accessed using the three symbols in the task bar.
Figure 7-3 Server-client architecture of the SITOP Manager
To Next Page
Loading...
Need help?
General
