Scan
3-34 Xerox 4112/4127 Copier/Printer
User Guide
Scan to PC
You can convert scanned data to TIFF, DocuWorks, or PDF formats, and then use the FTP or
SMB protocols to send the data to a computer on the network.
Note
A shared folder for saving scanned documents needs to be created on the computer before you
can scan the document.
1. From the All Services screen, select Scan to PC.
2. Specify a Transfer Protocol (See Transfer Protocol
on page 3-35).
3. Set and save the Address Book attributes by selecting Address Book... (See Address Book
on
page 3-35)
4. Select the applicable scanning options from the bottom portion of the screen. (See Generic
Scan Screen Featureson page 3-2)
5. As applicable, select features to configure from the Advanced Settings, Layout
Adjustment, and Filing Options tabs.
6. Press Start on the control panel.
For information about each of the tab features, refer to the following sections:
• Advanced Settings (See Advanced Settings tab
on page 3-12)
• Layout Adjustment (See Layout Adjustment tabon page 3-17)
• Filing Options (See Filing Options tab
on page 3-31)
Note
For information about how to configure the setup from the computer, refer to the manual
provided with the computer operating systems.
To Next Page
Loading...
Need help?
General
